manualshive.com logo in svg

Truma Boiler, Manual

Share
Download
Truma Boiler Manual Download Page 90

FITTED EQUIPMENT

182

Cycle racks

The Swift Group allows the fitment of a two 
cycle rack to our caravans and we have made 
provision for fixing blocks on most models for 
this purpose.
Due to the complex nature of a cycle rack, 
the different models available and the need 
to break into the habitation box (therefore, 
having a potential of a leak), we suggest 
this modification only be carried out by a 
competent person, ideally, a Swift Group 
dealer or Authorised Repairer.
Please be aware a cycle rack can not be fitted 
onto a model where there is a rear escape 
window. Please confirm this with your Swift 
Group Dealer.

Caravan motor movers

The design and fitment of a caravan motor 
mover shall be in accordance with the NCC 
Code of Practice 305 and you should ensure 
you receive a signed installation certificate of 
compliance from the installer.

Failure to do so may invalidate 
your warranty

CYCLE RACKS

Summary of Contents for Boiler































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands