FITTED EQUIPMENT
178
Always pull the doorscreen close to the centre.
It is not advisable to pull close to the top or
bottom as this will cause snagging and uneven
running.
!
WARNING:
When opening or releasing
the doorscreen, care must be taken to avoid
trapping fingers. When opening or releasing
the doorscreen, care must be taken to avoid
trapping fingers.
The door flynet operates independently of the
door by sliding across the door threshold.
Roof lights
When opening the roof lights, care must be
taken to release the locking mechanism as the
unit is raised.
Roof lights must be fully closed when towing.
Roof lights provide varying levels of fixed
ventilation.
Exterior Door Key
!
WARNING:
Care should be taken not to
leave the exterior door key in the door when
unlocking the door. The key may result in
damage in the vehicle side if the door is
released with the key still in the lock.
Windows
To open all window types turn the internal
handles through 90 degrees and push open
the window.
On models fitted with telescopic stays:
push open the window to the desired position
and tighten the stay. To close the window,
loosen the stays and slowly close taking care
to fold the stay inside the window and lock
off the handles by turning back through 90
degrees.
On models fitted with ratchet stays:
the
window locks in the open position to pre-set
positions located within the stay. To operate,
push open the window until you hear an
audible click and then slowly release the pane
and the window will be locked in the first
open position. Push open again to find the
next locking position. To close, fully open the
window which will disengage the locks and
allow the window to close slowly and lock
off the handles by turning back through 90
degrees.
Windows / Roller Blind Advice
In case of prolonged exposure to the sun roller
blinds should not be completely closed as this
could cause excessive heat concentration at
the top of the window, due to characteristics
of the glazing material the windows could be
adversely affected.
Roller blinds that shade from the bottom
upwards it is necessary to leave a gap of a few
centimetres open at the top, this way the heat
between window and blind can escape. A fly
screen does not cause an obstruction.
Roller blinds that shade from the top
downwards must be kept completely open,
or be opened regularly to allow the heat to
escape.
Keeping the windows in ventilation position
allows heat to escape.
Never fully close a roller blind system when
storing the vehicle or when not in use for
longer periods!
ROOFLIGHT
