FITTED EQUIPMENT
100
Display and control elements
2
3
5
4
8
6
7
9
1
1 -
Display
2 -
Status line
3 -
Menu line (above)
4 -
Menu line (below)
5 -
Display of mains voltage 230 V
(shore power)
6 -
Display timer
7 -
Settings / values
8 -
Control knob / push button
9 -
Back button
The control knob / push button (8) is used to
select menus in the lines (3 + 4) and configure
the settings. These are shown via a display (1)
with a lighted background. Pressing the Back
button (9) takes the user back out of the menu
again.
Control knob / push button
The control knob / push button (8) is used to
select and change set values and parameters;
these can be saved by clicking the control
knob / push button. Selected menu items will
flash.
+
-
Turn to the right (+)
• Menu is paged from left
to right.
• Increase values.
Turn to the left (-)
• Menu is paged from right to left.
• Reduce values.
Clicking
• Accept (save) a selected
value.
• Select a menu item, change
to the setting level.
3 sec
Press (3 seconds)
• Main switch function
ON / OFF
Back button
Pressing the Back button (9) takes the user
back out of the menu again and discards the
settings. This means that the previous values
are retained.
Functions
The functions in the menu lines (3, 4) of the
control panel can be selected in any sequence.
The operating parameters are shown in the
status line (2) or the displays (5, 6).
Start / stand-by screen
After connecting the control panel to the
power supply, a start screen is shown after a
few seconds.
If no entry is made within a few minutes, the
standby screen is automatically shown again.
The display shows the time and current room
temperature alternately.
TRUMA CP PLUS DIGITAL TIMER CONTROL
