36
5055.48-A 170915-44
TN24.BODYA
Fire Box Panel Installation
1. Insert back panel so that it is sitting on the ledge at the back of the fi rebox as shown in (Figure 86).
2. Insert side panels so that they are sitting on top of the lower back panel support as shown
in (Figure 87).
3. Insert fi rst side panel by tilting the panel into the fi re box chamber. Then slide the panel in until it
reaches the fi rebox side wall (Figure 88).
4. Repeat previous step to install the second side panel.
Back panel support
5. Insert the 3 upper baffl es by tucking the top part of the baffl e over top of the lip as shown
in (Figure 89) Let the bottom of the baffl e rest on top of the back panel, then let the top part
of the baffl e rest against the lip.
Installation
ledge
Installer Information
Figure 85: True north
interior panels.
Figure 86: Back panel.
Figure 87: Side panels location.
Figure 88: Side panel in place.
Figure 89:
First upper baffl e.
Figure 90:
Second upper baffl e.
Figure 91:
Third upper baffl e.
