29
5055.48-A 170915-44
TN24.BODYA
Accent Lighting Glass Plates
The TN24 Gas Stove comes with an assortment of glass plates of various colours. Accent
lighting is controlled via the remote control transmitter included with the TN24 Gas Stove
(Figure 1 on page 7). The glass plate tray is located underneath the stove (Figure 60)
and is held in place by two wing nuts - one on each side of the tray. The tray has two
elongated open slots so that it is not necessary to completely remove the wing nuts in order
to remove or replace the tray.
1. To remove the tray if necessary, undo the wing nuts until the tray is able to be lowered
onto the fl oor.
2. Unhook the two electrical leads (Figure 61).
3. A new glass plate slips into position as
shown in (Figure 62) & (Figure 63).
4. The glass plate is easily
accessed from the front of the
stove (Figure 64).
5. The True North Gas Stove is
now ready to turn on.
Connect electrical power and
turn on gas supply at this time.
CAUTION: Let the glass plate cool
down before changing.
Installer Information
Leads
Figure 60: True north 24 glass plate
tray location.
Figure 61: True north 24 Light tray
electrical hookup.
Figure 62: Glass plate partially
inserted.
Figure 63: Glass plate fully inserted.
Figure 64: Light tray access.
