27
5055.48-A 170915-44
TN24.BODYA
CAUTION: Over-tightening the wing nuts could
result in the glass door fracturing.
Screen Mesh Installation
The screen mesh is positioned in front of the glass door. It's purpose is to provide protection from the
heat radiating from the glass door. The screen has a front side and a rear side and must be oriented
correctly for a proper fit.
(Figure 53) shows the rear side of the screen mesh. This side must be facing toward the log set once it
is in place. (Figure 54) shows the front side of the screen mesh. This side must be facing outward once
it is in place.
The screen mesh frame is not square and so it is important that it be oriented the correct way before
insertion. (Figure 55) shows the screen mesh resting at a point where it is higher than the firebox frame
and glass door frame immediately to its right. (Figure 56) shows the screen mesh properly installed.
Installer Information
Figure 53: Rear side of screen mesh.
Figure 54: Front side of screen mesh.
Figure 55: Improper orientation of screen
mesh.
Figure 56: proper orientation of screen mesh.
