10
5055.48-A 170915-44
TN24.BODYA
If the gas stove is equipped with a hot air circulating fan, the speed of the fan can be controlled by
the Profl ame System. The fan speed can be adjusted through six (6) speeds. To activate this function
use the Mode Key (Figure 1) to index to the fan control icon (Figure 13). Use the Up/Down Arrow Keys
(Figure 1) to turn on, off or adjust the fan speed (Figure 13) & n(Figure 14). A single “beep” will confi rm
reception of the command.
Owners Information
Continuous Pilot/Intermittent Pilot (CPI/IPI) selection
With the system in the “OFF” position, press the Mode Key (Figure 1) to index to the CPI mode
icon (Figure 15). Pressing the Up Arrow Key will activate the Continuous Pilot Ignition mode (CPI).
Pressing the Down Arrow Key will return to IPI (Figure 16). A single “beep” will confi rm the reception
of the command.
The light bulb function controls the exterior accent lighting. To activate this function use the Mode
Key (Figure 1) to index to the light bulb icon (Figure 17). The intensity of the output can be adjusted
through six (6) levels. Use the Up/Down Arrow Keys (Figure 1) to adjust the output level (Figure 18).
A single “beep” will confi rm reception of the command.
Remote dimmer control (Light)
Comfort Fan Speed Control
Figure 13: Fan off.
Figure 14: Fan level HI.
Figure 15: CPI - IPI
selection.
Figure 16: IPI.
Figure 17: Accent
lighting off.
Figure 18: Accent lighting
high.
