30
5055.48-A 170915-44
TN24.BODYA
Operating Procedure
IFC Module
The Profl ame 2 Integrated Fireplace Control (IFC) module is a device that allows automatic ignition
and pilot fl ame supervision, and commands the functions of the gas stove. It’s confi gured to control
the ON/OFF main burner operation, giving the choice of both IPI (intermittent pilot ignition), and CPI
(continuous pilot ignition) modes. The Profl ame 2 IFC module controls and connects directly to the pilot
assembly and the automatic valve using low electric power.
The IFC module can be powered by both an AC power supply and battery pack for back up. The
Profl ame 2 offers the added ability to control the comfort fan speed from OFF through six (6) speeds, a
remotely actuated auxiliary outlet and a dimmable light outlet. The external batteries can provide DC
power to the IFC allowing the batteries to be used only when line power is interrupted or lost.
I
nitializing the System for the fi rst time
1. Install 4 AA batteries into the TN24 battery bay (Figure 65) located on the rear side of the
TN24 (Figure 68) . Install the ON/OFF switch cover (Figure 66) over top of the battery bay. Make sure
that the selection switch is on the “Remote” setting so that the remote control handset can be used.
2. Install 3 AAA batteries into the Profl ame2 Remote hand held transmitter (Figure 67) .
3. Plug the TN24 power cord into a wall socket and open the gas supply line.
4. Insert a straightened paper clip into the opening marked “PRG” of the ON/OFF battery bay cover
(Figure 66) and press the program button once. The IFC module, also located on the rear of the True north
24, will beep 3 times indicating that it is ready to synchronize with a remote transmitter.
5. On the Remote hand held transmitter, push the power on button once. The remote transmitter will beep 4
times to indicate that the remote transmitter and the control module are now synchronized.
The Remote hand held transmitter is now ready to use.
IFC Module
Battery Bay, gas
and power supply
recepticals.
Installer Information
Figure 65: On - Off switch located
at rear of stove.
Figure 66: On - Off switch cover.
Figure 67: Remote
control battery bay.
Figure 68: IFC module and ON - OFF
Switch location.
