24
5055.48-A 170915-44
TN24.BODYA
Installation of log set
1. Fill burner basket (Figure 42) with embers so that the basket is filled and overflowing the burners
front row (Figure 43). Reserve a small amount of embers for final placement.
2. Place first log onto the ledge in the firebox taking care that the log is completely set against the
rear wall of the firebox (Figure 44).
3. Fit the hole in the back of the 2nd log (Figure 45) over the post located on the left hand side of
the first log (indicated by the arrow). Once the 2nd log is mounted to the first log, position the
lower portion of 2nd log so that it is located close to the pilot without covering it, and as close to
the front of the firebox without interfering with the glass door once installed.
Log Set Installation
Installer Information
Figure 42: Burner with basket for embers. Tab
located on left side of burner for #3 log
placement.
Figure 43: Burner basket with embers.
Figure 44: Number 1 log set in place.
Figure 45: 2nd log placement and location of
its hole.
