![background image](http://html1.mh-extra.com/html/trojanlabel/trojan-3/trojan-3_user-manual_1171033080.webp)
TrojanThree User Guide
Page | 79
15
Trojan3 OP guidelines for printing bags
The Trojan3 is a versatile all-purpose over printer and is designed to print on most absorbing surfaces. It is
ideal for many types of applications such as many type of envelopes, card board boxes, paper bags and
wooden plates.
This document will describe how to print on paper bags using the T3 over printer, explaining how to feed
paper bags and general best practices for print preparation and maintenance.
The quick summary of this document and the overall headlines to achieve optimal conditions when printing
bags is the following:
Print only on flat surfaces (i.e. not on the handles and “bottom bump”)
Feed the bag sideways (moving handles outside the print zone)
Clean print head and cap (manually clean PH at job start)
The maintenance modules microfiber roller should be relatively dry
Use substrate vacuum cleaner
Please also refer to Chapter 20 for examples of different bag types, including a special flat type bags that
works very well with the T3.
OP
Over Printer
PH
Print Head
Cap
Part of the maintenance/service station that prevents the PH from drying or being
contaminated when idle