TrojanThree User Guide
Page | 17
3.
Remove the printhead from the foil bag.
4.
Remove the orange protective plastic cover from the printhead cartridge. Holding the printhead
cartridge by the handle
a.
Release the flaps covering the ink ports
b.
Release the clip retaining the cover near the center of the printhead cartridge
c.
Carefully remove the protective cover
5.
Remove the protective strip from the electrical contacts. While holding the printhead cartridge by
the handle with one hand, grasp the pull tab with the other hand and, slowly and carefully, peel
back the plastic strip covering the electrical contacts.
NOTE:
Dispose of the removed strip immediately and do not allow the removed strip to contact
the electrical contacts.
6.
Remove the protective strip from the printhead nozzles. While holding the printhead cartridge by
the handle with one hand, grasp the pull tab with the other hand and slowly and carefully peel
back the plastic strip covering the printhead nozzles. Maintain an angle of no less than 45° with
the printhead surface when pulling on the strip.
