TrojanThree User Guide
Page | 59
Media Settings Advanced:
•
KWS mode:
KWS = Keep Wet Spitting
KWS is a function to protect the 70,400 printhead nozzles from dehydration. In practice it means
that during printing all the nozzles fire some ink, even the nozzles which do not take part effectively
in printing. As a result tiny (almost microscopic) dark spots of ink might be seen on printouts,
especially when the background of the printed image is light in color. When those tiny spots are not
acceptable from the print quality point of view, this function can be reduced or switched off
completely.
NOTE:
See KWS levels on next page more detailed
•
Mid job maint. Distance (meter):
Setting mid-job maintenance frequency in printed linear meters.
Mid-job maintenance is a full printhead maintenance during processing a print job to preserve best
print quality.
NOTE:
Actual value is always displayed at status bar on the screen
•
Print Height:
Adjusting the height of the printhead compared to the height of the media. The ideal
distance for the printhead above the media is around 1mm.
Save as Profile
Delete Profile
Save & Apply
Saved Profiles List
