TrojanThree User Guide
Page | 36
Media:
Type:
List of available color profiles (5 profiles by default)
Size:
predefined size from the list or custom size
•
Media Name:
Save custom size into the profile list
•
Oversize:
Full bleed printing = oversizing the image by 1mm over the edges when printed.
Aspect ratio is locked
•
Overspray:
Overspray printed image over the label size by 0.5mm. Does not
preserve aspect ratio.
Color Selection:
Color mode
(uses CMYK ink to mix out colors on labels)
Composite Black
(uses CMYK to mix out black color on labels)
Black Only
(uses only black ink for printing black color on labels)
Print speed:
6 IPS
(max. resolution 1600 x 1600 dpi) ~ 9 meters / minute
12 IPS
(max. resolution 1600 x 800 dpi) ~ 18 meters / minute
Page Management:
Stitching:
Stitching images together make one continuous image. This mode is for
exceeding the maximum printable label length which is 762mm.
TIPS&TRICKS:
The maximum printable label length is 762mm. If 762mm label height is not
enough, then
stitching
is the workaround option. In practice, create a multipage PDF where
the long image is cut into pieces. This way if stitching option is on, the TrojanThree printer
will stick all images from the multipage PDF together and print it out as one continuous
image without gaps between pages.
NOTE:
PAUSING
a stitched print job is only possible at the mid job maintenance interval
(defined in TrojanThree -> Media Settings -> Advanced menu). The reason for this is
because the stitch mode job counts as 1 page for the firmware and normal pause is only
possible between 2 pages. We developed a workaround for this.
