Trojan POWER RACK 400, Assembly And Instruction Manual

Page: 9 / 32

10148-9
4. ASSEMBLY STEPS - CAGE
STEP 1
• Attach Bell Tube (24) to the Right Base Tube (10) using one 3/8”
x 3/4” Hex Bolt (54) and one 3/8” Washer (64). Install the Round
Rubber Bumper (34) onto the Bell Tube (24).
• Attach Right Base Tube (10) and Left Base Tube (11) to the
Connect Frame (20) using four 3/8” x 2-7/8” Hex Bolts (59),
eight 3/8” Washers (64) and four 3/8”Locknuts (67).
STEP 2
• Attach the two Support Frames (4) to Right Base Tube (10) and
Left Base Tube (11) using four 3/8” x 3” Hex Bolts (60), eight 3/8”
Washers (64) and four 3/8” Locknuts (67).
• Attach the Right Vertical Frame (13) and Left Vertical Frame (14)
to the Right Base Tube (10) and Left Base Tube (11) using four
3/8” x 2-7/8” Hex Bolts (59), eight 3/8” Washers (64) and four
3/8” Locknuts (67).
• Attach the Right Vertical Frame (13) and the Left Vertical Frame
(14) to the two Support Frames (4) using four 3/8” x 3/4” Hex
Bolts (54) and four 3/8” Washers (64).