Trojan POWER RACK 400, Assembly And Instruction Manual

Page: 14 / 32

STEP 9
• Attach one end of the Butterfly Cable (51) to the Left Butterfly Arm (8) using one 3/8” x 1” Hex Bolt (55), one
3/8” Washer (64) and one 3/8”Locknut (67).
• Make sure the Butterfly Cable (51) is in the groove of Pulley (32); install Pulley A into the Turn Pulley Bracket (25)
using one 3/8” x 2” Hex Bolt (56), two 3/8” Washers (64) and one 3/8” Locknut (67).
• Install Pulley B into the Single Pulley Bracket (26) using one 3/8” x 2” Hex Bolt (56), two 3/8” Washers (64) and one
3/8” Locknut (67).
• Install Pulley C into the Turn Pulley Bracket (25) using one 3/8” x 2” Hex Bolt (56), two 3/8” Washers (64) and one
3/8” Locknut (67).
• Attach the other end of the Butterfly Cable (51) to the Right Butterfly Arm (7) using one 3/8” x 1” Hex Bolt (55),
one 3/8” Washer (64) and one 3/8”Locknut (67).
10148-14
4. ASSEMBLY STEPS - CAGE