Trojan POWER RACK 400, Assembly And Instruction Manual

Page: 10 / 32

10148-10
4. ASSEMBLY STEPS - CAGE
STEP 3
• Attach the Upright Frame (5) and the Back Base
Tube (2) to the Connect Frame (20) using two
3/8” x 3-1/8” Hex Bolts (61), four 3/8” Washers
(64) and two 3/8”Locknuts (67).
STEP4
• Attach the Back Beam (6) to the Back Base Tube
(2) using two 3/8” x 3/4” Hex Bolts (54) and two
3/8” Washers (64).
• Install two Spring Clips (35) to the Slide Frame
(21), then slide the Slide Frame (21) onto the
Back Beam (6).