General Information
51
The flashing of two riding mode icons
together indicates that MAP, ABS or TTC
settings specified by the selected riding
mode have not been correctly selected.
In this case the MIL, ABS or TTC warning
light(s) may be illuminated depending on
the current state of each system.
In the event of an incomplete riding
mode change:
• Safely bring the motorcycle to a
stop
• Select neutral gear
• Turn the ignition OFF and then back
ON again
• Select the desired riding mode
• Restart the engine and continue
riding.
Warning
Do not stop the engine using the
ignition switch or engine stop switch
while the motorcycle is moving. Always
bring the motorcycle to a stop safely
and engage neutral gear prior to
stopping the engine. Stopping the
engine by turning off the ignition or
engine
stop
switch
while
the
motorcycle is moving can lock the rear
wheel causing loss of motorcycle
control and an accident.
Caution
The engine should not be stopped by
turning the ignition switch to the OFF
position when the motorcycle is
moving. The engine stop switch is for
emergency use only. Stopping the
engine when the motorcycle is moving
may cause damage to motorcycle
components
leading
to
loss
of
motorcycle control and an accident.
Note:
•
If the mode icons are not visible
when the ignition switch is in the
ON position, ensure the engine stop
switch is in the RUN position.
