Maintenance
153
Headlight Adjustment
Each headlight can be adjusted by
means of vertical and horizontal
adjustment screws located on the rear
of each headlight. In addition, the
headlight is equipped with an easily
accessible adjuster to allow the vertical
adjustment to be corrected when the
motorcycle is fully loaded.
3
2
1
1.
Horizontal (LEFT - RIGHT) adjustment
screw
2.
Vertical (UP - DOWN) adjustment screw
3.
Headlight adjuster lever for loaded
conditions
Switch the headlight dipped beam on.
Turn
the
vertical
(UP
-
DOWN)
adjustment screw on the headlight
clockwise to raise the beam or
counterclockwise to lower the beam.
Turn the horizontal (LEFT - RIGHT)
adjustment screw clockwise to move the
beam to the right or counterclockwise
to move the beam to the left.
Switch the headlights off when the
beam settings are satisfactory.
Headlight Adjustment Lever for
Loaded Conditions
1
2
cgin
1.
Headlight adjuster lever (unloaded
position)
2.
Headlight
adjuster
lever
(loaded
position)
For normal (unloaded) conditions the
headlight adjuster lever should be set in
the horizontal position (1).
For loaded conditions rotate the
headlight adjuster downwards until it
stops (2). This will lower the headlight
beams by approximately 2°.
