General Information
84
To adjust the windshield height, loosen
both adjuster knobs sufficiently to allow
the adjustment blocks to slide over the
adjustment plates.
2
3
4
1
1.
Windshield
2.
Adjuster knob (right hand side shown)
3.
Adjustment block
4.
Adjustment plate
Position the windshield to the desired
height, ensuring both adjustment blocks
are set to the same position.
Tighten the adjuster knobs to secure
the windshield in position.
Tool Kit and Handbook
The tool kit is located under the pillion
seat and is secured with a rubber strap.
The handbook assembly is located in a
slot in the base of the pillion seat.
Helmet Hook
A helmet can be secured to the
motorcycle using the helmet hook
located on the left hand side of the
motorcycle, beneath the rider's seat.
1
cgif
1.
Helmet hook
To attach a helmet to the motorcycle,
remove the pillion seat and loop the
helmet chin strap over the hook. Ensure
the flat area above the hook is not
obstructed by the helmet strap, as this
will prevent the pillion seat engaging
correctly.
1
cgif
1.
Helmet hook flat area
To secure the helmet, reinstall the seat
and lock into position.
