General Information
82
Warning
Continued
A loose or detached seat could cause
loss of motorcycle control and an
accident.
Warning
To prevent detachment of the seat
during riding, after installing always
grasp the seat and pull firmly upwards.
If the seat is not correctly secured, it
will detach from the lock. A loose or
detached seat could cause loss of
motorcycle control and an accident.
Rider's Seat
1
1.
Rider's seat
To remove the rider's seat, remove the
pillion seat (see page 81).
Grasp the rider's seat on either side,
and slide it rearwards and upwards. If
equipped with heated seats, disconnect
the heated seat’s electrical connector
for
complete
removal
from
the
motorcycle.
To reinstall the seat, reconnect the
heated seat’s electrical connector (if
equipped). Engage the seat's front rail
into the bracket at the rear of the fuel
tank and lower the rear rail in to the
rear brackets. Push down firmly on the
rear of the seat. Reinstall the pillion seat
(see page 81).
Warning
The rider's seat is only correctly
retained and supported once the pillion
seat is correctly installed. Never ride
the motorcycle with the pillion seat
detached or removed, as the front seat
will not be secure and may move.
A loose or detached seat could cause
loss of motorcycle control and an
accident.
Rider's Seat Height Adjustment
2
4
5
3
1
1.
Rider's seat
2.
Front seat height adjuster
3.
Pillion seat height adjuster
4.
Low seat height position (rear shown)
5.
High seat height position (rear shown)
The rider's seat is adjustable for height
by approximately 0.98 in (25 mm).
To adjust the rider's seat:
