General Information
79
Reinstall the upper clamps, and secure
with the two 0.39 in (10 mm) threaded
fasteners in the rear fastener positions.
Do not fully tighten the fasteners at
this stage.
Rotate the handlebar so that the
alignment marking on the handlebar
aligns with the split line on the upper
clamps/risers.
1
2
3
1.
Upper clamp
2.
Clamp split line
3.
Alignment marking (Tiger XRX shown)
Tighten the 0.39 in (10 mm) fasteners to
26 lbf ft (35 Nm)
.
Reinstall the 0.31 in (8 mm) fasteners to
the front positions and tighten to
19 lbf
ft (26 Nm)
.
Satellite Navigation Mounting
Bracket - Tiger XRT and
Tiger XCA
Tiger XRT and Tiger XCA models are
equipped with a satellite navigation
mounting bracket. The bracket features
a mounting plate that is compatible with
Garmin
Nuvi®
Satellite
Navigation
Systems 660 and 220.
Other satellite navigation systems may
be compatible.
When installing a satellite navigation
system, refer to the manufacturer’s
instructions.
To adjust the mounting plate, loosen the
pivot bolt and set the mounting plate to
the desired position. Retighten the pivot
bolt to
44 lbf in (5 Nm)
.
cisf
1
2
1.
Mounting plate
2.
Pivot bolt
The
satellite
navigation
mounting
bracket is also available as an accessory
kit from your authorized Triumph dealer.
