General Information
50
Note:
•
It is not possible to select the
RIDER Mode while the motorcycle is
in motion if ABS and/or TTC are set
to Off when setting the RIDER Mode
options (see page 52).
Press and release the MODE button on
the instrument housing until the desired
riding mode is flashing in the display.
2
3
1
1.
MODE button
2.
Selected riding mode (flashing)
3.
Current (active) riding mode
Note:
•
The
selected
riding
mode
is
automatically activated when the
following conditions are met:
Within 30 seconds of pressing the
MODE button the rider must carry out
the following simultaneously:
• Close the throttle
• Pull the clutch in
• Ensure that the brakes are not
engaged (allow the motorcycle to
coast).
Once the MAP, ABS and TTC settings
have changed, the selected riding mode
will be displayed and the previous mode
will no longer be visible.
1
1.
Selected riding mode
Resume riding as normal.
Note:
•
If any one of the systems (MAP,
ABS or TTC) fails to change to the
settings specified by the selected
riding mode, both the previous and
the selected riding mode icons will
flash.
1
1.
Incomplete mode change (flashing)
