CAUTION
A cracked boss will cause oil to leak from the clutch cover.
Ensure the washer is correctly positioned on the gear change shaft.
1.
ciur
1
2
Gear change shaft
1.
Washer
2.
Thoroughly clean the cover and crankcase mating faces.
2.
Position a new gasket to the crankcase.
3.
Refit the cover ensuring that the gasket does not become dislodged.
4.
Note
Ensure that the lifter piece claw engages correctly with the pull rod during
assembly. It may be necessary to rotate the lifter piece rack to allow assembly
to take place.
Fixings 4 and 10 are encapsulated and must be replaced during fitment.
Refit the two brackets for the clutch cable and fixings as noted during removal,
tighten the fixings as described below:
5.
Tighten fixings 1 to 13 in the sequence shown below to
10 Nm
.
Fit the clutch cable bracket and tighten fixings 14 and 15 to
10 Nm
.
6.
Retighten fixings one, two and six to
10 Nm
.
13
9
7
5
1
3
Service Manual - Scrambler 1200 XC
144 of 640
Summary of Contents for Scrambler 1200 XC
