cjzb
Coolant temperature sensor
1.
Fit a new washer to the coolant temperature sensor.
1.
Apply ThreeBond 1374 to the threads of the coolant temperature sensor.
2.
Fit the coolant temperature sensor into the cylinder head and tighten to
18 Nm
.
3.
Route the wiring as noted prior to removal and reconnect the sensor to the main
harness.
4.
Refit the coolant temperature sensor electrical connector to the ignition coils
bracket.
5.
Perform the following operations:
Radiator - Installation
Coolant Replacement - Filling
Fuel Tank - Installation
Battery - Installation
Seat - Installation
WARNING
Before starting work, ensure the motorcycle is stabilised and adequately
supported. This will help prevent it from falling and causing injury to the operator
or damage to the motorcycle.
Perform the following operations:
Seat - Removal
Battery - Removal
Fuel Tank - Removal
Ignition Coils - Removal
Remove the fixing and remove the MAP sensor.
1.
2
Service Manual - Scrambler 1200 XC
550 of 640
Summary of Contents for Scrambler 1200 XC
