60
General Information
Seat Lock
Rider's Seat
Street Triple and Street Triple R
1.
Seat lock
The seat lock is located on the left hand side
of the rear bodywork, in line with the footrest
mounting rail. To remove the seat, insert the
ignition key into the seat lock and turn it
counter-clockwise while pressing down on
the rear of the seat. This will release the seat
from its lock and allow it to be slid rearwards
for complete removal from the motorcycle.
To re-install the seat, engage the seat's
tongue under the fuel tank and press down
at the rear to engage in the seat lock.
An audible click can be heard when the seat
is fully engaged in its lock.
Rider's Seat
Daytona 675 and Daytona 675 R
1.
Riders seat
2. Fasteners
To remove the riders seat: Remove the
fasteners located beneath the padding. This
will allow the riders seat to slide rearwards for
complete removal from the motorcycle. To re-
install the seat, engage the seat's tongue
under the fuel tank, fit and tighten the
fasteners to
80 lbf-in (9 Nm)
.
Warning
To prevent detachment of the seat during
riding, after fitting always grasp the seat
and pull firmly upwards. If the seat is not
correctly secured, it will detach from the
lock. A loose or detached seat could cause
loss of motorcycle control and an accident.
1
2
2
1
