94
Maintenance and Adjustment
Coolant Level Adjustment
Allow the engine to cool.
Daytona 675 and 675 R
The expansion tank is positioned behind the
right hand side fairing and is attached to the
radiator. To add coolant to the expansion tank,
the right hand fairing must first be removed.
Remove the rider's seat.
Remove the battery strap.
Disconnect the battery leads, negative (black)
lead first.
Remove the screw securing the cockpit infill
panel.
To remove the cockpit infill panel, lift slightly
and pull rearwards to extract the tags from
the grommets at the rear of the headlight.
1.
Screw
2. Cockpit infill panel
Remove the panel.
Noting their position, remove the three
screws securing the fairing to the cockpit.
1.
Screw
2. Upper Fairing
Note:
•
The radiator infill panels do NOT
need to be removed in order to
remove the fairings.
Noting their position, remove the four
scrivets securing the fairing to the radiator
infill panels.
1.
Lower infill panel
2. Scrivets
3. Upper infill panel
Warning
Do not remove the radiator pressure cap
when the engine is hot. When the engine
is hot, the coolant inside the radiator will be
hot and also under pressure. Contact with
this hot, pressurized coolant will cause
scalds and skin damage.
2
1
1
1
2
1
chud
1
3
2
2
2
2
