89
Maintenance and Adjustment
Stop the engine, then wait for at least
three minutes for the oil to settle.
Remove the dipstick, wipe the blade clean
and screw fully home.
Note:
•
An accurate indication of the level of
oil in the engine is only shown when
the engine is at normal operating
temperature, the motorcycle is
upright (not on the side stand) and
when the dipstick has been screwed
fully home.
•
Do not add oil through the dipstick
hole in the crankcase.
Remove the dipstick.
The oil level is indicated by lines on the
dipstick. When full, the indicated oil level
must be level with the upper marking on the
dipstick.
If the oil level is below the lower marking,
remove the filler plug and add oil a little at a
time through the filler plug hole in the clutch
cover until the correct level is reached.
Once the correct level is reached, fit the
dipstick and the filler plug.
Oil and Oil Filter Change
1.
Oil drain plug (Street Triple shown)
2. Oil filter
The engine oil and filter must be replaced in
accordance with scheduled maintenance
requirements.
Warm up the engine thoroughly, and then
stop the engine and secure the motorcycle in
an upright position on level ground.
Remove the fairing (Daytona 675 and 675 R
only).
Place an oil drain pan beneath the engine.
Remove the oil drain plug.
Warning
Prolonged or repeated contact with engine
oil can lead to skin dryness, irritation and
dermatitis. In addition, used engine oil
contains harmful contamination that can
lead to skin cancer. Always wear suitable
protective clothing and avoid skin contact
with used oil.
chri
2
1
