134
Maintenance and Adjustment
Headlight Adjustment - Street Triple
and Street Triple R
Headlight Adjustment - Vertical
1.
Vertical beam adjuster bolts
The vertical beams of the left and right hand
headlights can only be adjusted together.
Independent adjustment is not possible.
Switch the headlight dipped beam on.
Loosen the clamp bolts sufficiently to allow
restricted movement of the headlights.
Adjust the position of the headlights to give
the required beam setting.
Tighten the clamp bolts, front first, to
11 lbf-ft (15 Nm)
.
Re-check the headlight beam settings.
Switch the headlights off when the beam
settings are satisfactorily set.
Headlight Adjustment - Horizontal
1.
Headlight mounting nut
The horizontal beams of both headlights can
be adjusted individually. The same procedure
is used to adjust either headlight.
Switch the headlight dipped beam on.
Loosen the headlight mounting nut.
Adjust the left or right horizontal position of
the headlight to give the required beam
setting.
Tighten the nut to
22 lbf-ft (30 Nm)
.
Repeat for the second headlight.
Re-check the headlight beam settings.
Switch the headlights off when both beam
settings are satisfactorily set.
1
cgfc_2
1
cgfc_3
