96
Maintenance and Adjustment
Remove the cap from the expansion tank
and add coolant mixture as necessary to
bring the level up to the 'MAX' mark. Re-
install the cap.
1.
Coolant expansion tank
2. Coolant expansion cap
3. Upper fluid level
4. Lower fluid level
Installation
Installation is the reverse of removal noting
the following.
Re-install the screws securing the fairing to
the frame and tighten to
44 lbf-in (5 Nm)
.
Re-install the screws securing the fairing
lower halves to each other and tighten to
27 lbf-in (3 Nm)
.
Tighten the frame protector screws to
80 lbf-in (9 Nm)
(if equipped).
Re-install the screws securing the cockpit to
the fairing and tighten to
27 lbf-in (3 Nm)
.
Re-install the right hand cockpit infill panel
and tighten to
27 lbf-in (3 Nm)
.
Connect the battery leads, positive (red) lead
first.
Re-install the battery strap.
Re-install the rider's seat and tighten the
screws to
80 lbf-in (9 Nm)
.
chuk
1
3
4
2
