33
General Information
Press and release button 'A' until AbS is
visible in the upper display screen.
1.
Upper display
2. Button A
Press and release button B, at this point
On-Off-Cir will flash in the upper display.
Press and release button 'A' until Cir is
displayed in the upper display screen.
1.
Upper display
2. Button B
Press button 'B' to activate the circuit mode
within the ABS system; after 2 seconds the
message CIRCUIT will be displayed in the
instruments.
1.
Circuit mode
2. Button B
Note:
•
When the motorcycle is set to Cir
and the motorcycle starts to move
the display will default to Trip1.
•
If the ABS menu is displayed and the
motorcycle starts to move the ABS
menu will exit, no changes will be
made and the menu will revert to
Trip 1.
2
1
CIRCUIT
2
1
CIRCUIT
2
1
CIRCUIT
