Triumph Adler P-4532DN Operation Manual Download

Page: 163 / 282

8-13

Setup and Registration (System Menu) > System Menu

Network

Configures network settings.

Host Name

[

Menu

] key > [

▲

] [

▼

] key > [

Network

] > [

] key > [

▲

] [

▼

] key > [

Host Name

] > [

] key

Wi-Fi Direct Set

[

Menu

] key > [

▲

] [

▼

] key > [

Network

] > [

] key > [

▲

] [

▼

] key > [

Wi-Fi Direct Set

] > [

] key

Set Wi-Fi Direct.

User Name

Set whether the user name set in the printer driver is displayed.

Value

: Off, On

Job Name

Set whether the job name set in the printer driver is displayed.

Value

: Off, Job Name, Job No.+Job Name, Job Name+Job No.

Job Terminator

You can select the condition which regarded as a job termination if the print job could not be
processed until the end due to your environment and the other reason.

Value

EOJ

: Up to the detection of a command indicating the end of job data is regarded as one job.

End of Session

: The data included in a network session at network connection is regarded as

one job.

UEL

: The UEL included in the termination of the job data is regarded as one job until it is

detected.

Item

Description

Host Name

Check the host name of the machine. Host name can be changed from Embedded Web Server RX.

Changing Device Information (page 2-43)

NOTE

This function is displayed when the optional Wireless Network Interface Kit is installed.

Item

Description

Wi-Fi Direct

Select whether to use Wi-Fi Direct.

Value

: Off, On

Device Name

Specify the device name.

NOTE

•

Up to 32 characters can be entered.

•

This function is displayed when [

Wi-Fi Direct

] is set to [

IP Address

Check the IP address of the machine.

TCP/IP Settings (page 8-16)

NOTE

This function is displayed when [

Wi-Fi Direct

] is set to [

Item

Description

Summary of Contents for P-4532DN



























































































































































































































































































Search results

Summary of Contents for P-4532DN

Reviews:

Related manuals for P-4532DN

Brands by name

Popular brands

Triumph Adler P-4532DN, Operation Manual

Search results

Summary of Contents for P-4532DN

Reviews:

Related manuals for P-4532DN

Brands by name

Popular brands