Triumph Adler P-4532DN Operation Manual Download

Page: 155 / 282

8-5

Setup and Registration (System Menu) > System Menu

Job Log History

[

Menu

] key > [

▲

] [

▼

] key > [

Report

] > [

] key > [▲] [▼] key > [

Job Log History

] > [

] key

Font List

Prints the font list, allowing you to check the font samples installed in the machine.

RAM File List

You can print a list of the files in the RAM disk.

NOTE

This setting is displayed when [

RAM Disk Mode

] is set to [

SSD File List

You can print a list of the files in the SSD.

NOTE

Displayed when the optional SSD is installed.

SD Card FileList

You can print a list of the files in the SD Card.

NOTE

Displayed when the optional SD Card is installed.

DataSanitization

You can print a Data Sanitization Report.

Item

Description

Auto Sending

This function automatically sends the log history to the specified destinations whenever a set
number of jobs has been logged.

Value

Off/On: Off, On
Jobs: Set the number of jobs at which the job history is automatically sent. The setting

range is 1 to 100.



This setting is displayed when [Off/On] is set to [On].

Send History

You can also send the log history to the specified destinations manually.

Destination

Set and check the destination to which log histories are sent.

Value

Confirmation: Check the destination to which log histories are sent.
Address Entry: Set the destination to which log histories are sent. Only E-mail address

can be set.

Subject

Set the subject automatically entered when sending log histories by E-mail.

Value

: Up to 60 characters

Personal Info.

Select whether to include personal information in the job log.

Value

: Include, Exclude

Item

Description

Summary of Contents for P-4532DN



























































































































































































































































































Search results

Summary of Contents for P-4532DN

Reviews:

Related manuals for P-4532DN

Brands by name

Popular brands

Triumph Adler P-4532DN, Operation Manual

Search results

Summary of Contents for P-4532DN

Reviews:

Related manuals for P-4532DN

Brands by name

Popular brands