Triumph Adler DCC 2625, Instruction Handbook Manual

Page: 274 / 370

System Menu
7-28
6 Press [Close].
7 Press [Yes]. The hard disk data is overwritten and the specified encryption key is enabled. The
display returns to the
Machine Default screen.
Setting the Calibration Cycle
After Auto Clear has been activated, or during
printing or while processing Color
Registration,
Calibrating... 50 seconds
remaining may be displayed. While this
message is displayed, the machine makes
adjustments to maintain image quality. Wait
until the message disappears.
Set the calibration cycle here. The setting
items are as follows.
1 Referring to Accessing the Machine Default Screen on page 7-13 in the Advanced Operation Guide ,
access the Machine Default screen.
2 Press [
S
] or [
T
] to select Calibration and press [Change #].
3
Select [Short], [Standard] or [Long].
4 Press [Close] to save settings or [Back] to cancel settings. The display returns to the Machine
Default screen.
Item Description
Short Sets a short calibration cycle and increases the number of times
performed, with priority to image quality.
Standard Sets a standard calibration cycle, compromising between image
quality and downtime for processing.
Long Sets a long calibration cycle and decreases the number of times
performed, to ensure minimal downtime.
Pa
Color func. Function User choice
Basic
11×8½"
Plain
11×17"
Color
11×8½"
Plain
11×8½"
Plain
MP tray
Plain
APS Auto %
Reduce
100%
Exposure
Auto
Staple
Staple
Left To
Staple
Exposure
/Enlarge Mode
Progr
Please wait.
Calibrating... 50 seconds remaining.