Triumph Adler DCC 2625 Instruction Handbook Manual Download Page 171

Page: 171 / 370

Setting Scanner from a Web Browser

5-5

Menu Frame

From the menu frame, select the desired configuration items for the scanner.

NOTE:

Each item in the menu frame can be configured in succession. However, if the same item is

selected during configuration, settings made until then are lost.

Main Frame

Displays the scanner system information. You can also change the display language.

NOTE:

When launched, the default values are shown.

Display

Description

Home

Select

Home

to return the browser to the top page for accessing the scanner.

System Setting

is used to configure scanner related settings, and contains

the following items.

•

System Basic Setting

: Configure settings related to the scanner's

network interface.

•

Scanner Default Setting

: Configure default values for main scanner

functions.

•

Sender List

: Configure the Sender (User) List for use with scanner

functions (Send E-mail, Scan to PC, Database Connection, Scan to FTP).

•

Reset

: Reset the scanner or restore settings to their factory default

settings.

“Send E-mail”
Setting

“Send E-mail” Setting

is used to configure basic settings required for Send

E-mail.

•

E-mail Basic Setting

: Configure basic items related to Send E-mail.

•

Destination List

: Register addresses for e-mail destinations.

“Scan to PC”
Setting

Use

“Scan to PC” Setting

to configure various settings for sending files to a

computer (PC) for saving.

•

Destination List

: Register addresses for destination computers (PCs).

“Scan to FTP”
Setting

“Scan to FTP” Setting

is used to configure various settings for transferring

files to FTP servers.

•

Destination List

: Register FTP servers or other settings.

Display

Description

Scanner Status
Information

When the top page scanner status changes to

OTHER

, click the

Refresh

button to verify the status of the system. When the scanner

status is

Ready to Scan

is displayed.

The following 6 status results can be obtained from the scanner device.

Ready to Scan

Using Scanner

(Document Processor)

Paper

Jam

System Error

Processing

Energy Save Mode

Ethernet Address

The scanner’s MAC address will be displayed.

Scanner Firmware

The scanner’s firmware version will be displayed.

Network Firmware

The scanner’s network firmware version will be displayed.

Color Profile

The color profile filename compatible with this device will be displayed.

Language

You can switch the language shown in the Web Page.

Summary of Contents for DCC 2625



















































































































































































































































































































































































Search results

Summary of Contents for DCC 2625

Reviews:

Related manuals for DCC 2625

Brands by name

Popular brands

Triumph Adler DCC 2625, Instruction Handbook Manual

Search results

Summary of Contents for DCC 2625

Reviews:

Related manuals for DCC 2625

Brands by name

Popular brands