manualshive.com logo in svg

Triumph Adler DC 2465, User Manual

Share
Download
Triumph Adler DC 2465 User Manual Download Page 479

Troubleshooting 

12-15

12

Error Message

Checkpoints

Corrective Actions

Reference 

Page

The cover is open.

Is there any cover which is 
open?

Close the cover indicated on the 
touch panel.

—

The folding tray is 
open.

—

Set the folding tray.

—

The folding unit is 
open.

—

Close the folding unit.

—

The phone receiver is 
off the hook.

—

Put down the receiver.

—

The power cable is 
unplugged.

—

Turn the main power switch off and 
check that the power cable is 
correctly plugged.
After checking the power cable, turn 
the main power switch on.

2-8

The removable 
memory is not 
formatted.

Is the removable memory 
formatted by this machine?

Perform [Format] on this machine.

—

The slit glass requires 
cleaning.

—

Clean the slit glass using the cleaning 
cloth supplied with the document 
processor.

11-12

Toner container is 
empty. 

—

Replace the toner container to our 
specified toner container.

11-2

Toner is empty.

—

Replace the toner container to our 
specified toner container.

11-2

Toner is running out.

—

It is almost time to replace the toner 
container. Obtain a new toner 
container.

—

Tray # is full of paper.

Is the acceptable storage
capacity exceeded?

Remove the paper. Printing then 
resumes.

—

Unknown toner 
installed.

Is the installed toner 
container our own brand?

We will not be liable for any damage 
caused by the use of third party 
supplies in this machine.

—

Unknown Toner 
Installed. PC

Does the installed toner 
container's regional 
specification match the 
machine's?

Install the specified container.

—

Summary of Contents for DC 2465



















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands