Triumph Adler DC 2042, Instruction Handbook Manual

Page: 81 / 109

●
How to set the machine default setting mode
1. Touch the "SPECIAL" key.
The management mode selection screen will appear.
77
COPIER MANAGEMENT
2. Touch the "MACHINE DEFAULT" key.
3. Enter the management code "4200" with the numeric keys.
* The display will return to the machine default setting screen if the management code
matches the registered code.
See the followings to make the settings of each mode.
* The 4-digit management code can be changed. (page 79, "
9
CHANGE
MANAGEMENT CODE WITH #-KEYS")
1
UN-FIXED SIZE FROM BYPASS
1. Touch the "ON" key or "OFF" key for the "UN-FIXED SIZE FROM BYPASS".
* When setting other modes continuously, see the setting of each mode. When finishing
the setting, finish the machine default setting in accordance with the "
●
How to finish
the machine default setting" on page 80.
●
How to set the custom sizes
When loading paper of other than the standard size (custom size), such as A4, in the
stack bypass tray, set the paper size in accordance with the following procedure.
* When using this setting, "ON " must be selected for the above "
1
UN-FIXED SIZE
FROM BYPASS".
1. Set the paper in the stack bypass tray (page 12) and touch the " ByPass" key.
2. Select the paper set in the stack bypass tray by touching the "STANDARD SIZES" key
or "CUSTOM SIZES" key.
* If the "STANDARD SIZES" key is touched, go to step 5.
If the "CUSTOM SIZES" key is touched, go to next step.