Triumph Adler DC 2042, Instruction Handbook Manual

Page: 15 / 109

(1) How to load paper
In the drawer-type paper feed desk, paper can be loaded at a total 5 points-- the 4
drawers and the stack bypass tray. In the deck-type paper feed desk, paper can be
loaded at a total 4 points-- the 2 drawers, the deck and stack bypass tray.
1
Loading paper into the drawers
Paper can be loaded into the drawers at the front of the copier. Each drawer holds
up to 550 sheets of standard (80 g/m
2 ) or colored paper.
The drawer can be set to hold paper of any desired size from A3 to A5R.
11
PREPARATIONS
1. Pull the drawer out toward you as far as it will go.
* Not to pull more than one drawer out at the same time.
2. Turn the width adjustment lever to align the width guide with the paper's width.
3. Turn the length adjustment lever to align the length guide with the paper's length.
* A sticker indicates how high paper can be loaded. Do not exceed the limits on the
sticker.
* When loading paper into the drawer, make sure the copy side is facing downward.
(The copy side is the side facing upward when the package is opened.)
4. Set the paper against the right-hand wall of the drawer, and position the paper
so that it is aligned with the correct size indicator lines (marked on the bottom of
the drawer) for its size.
03/2AC-E/11-18.q 2/18/00 10:57 Page 11