Triumph Adler DC 2042, Instruction Handbook Manual

Page: 100 / 109

96
TROUBLESHOOTING
Trouble Checks Action Page
Copies come out too
dark. Is the copier in the auto exposure
mode? Adjust exposure settings in the "AUTO
EXPOSURE ADJUSTMENT".
73
Is the copier in the manual exposure
mode?
Adjust the exposure to the correct
degree using the manual exposure
adjustment keys.
17
To adjust the overall exposure,
perform "MANUAL EXPOSURE
ADJUSTMENT".
73
Drawer cannot be
closed. Was more than one drawer pulled
open at one time?
Pull open the drawer that is closed,
and close it together with the drawer
that could not be closed.
----------
Copies are dirty.
Is the platen, the slit glass or the
original cover dirty? Clean the platen, the slit glass and/or
the original cover.
97
Copy image is askew. Are the originals set correctly?
When originals are set in the DF, align
them with the original insertion guide
securely.
When originals are set on the platen,
align their edges with the correct
original size indicator lines for their
size.
15, 16
Paper keeps being
misfed. Is the paper set correctly in the
drawers?
Set paper correctly.
11
Is paper curled, folded over or
wrinkled?
Replace the paper with new paper.
11
Is there any misfed paper or loose
scraps of paper remaining inside the
copier?
Carry out the appropriate procedure to
remove the paper.
86
Black lines appear on
the copy.
Is the slit glass dirty? Clean the slit glass.
97
Copied paper may curl badly and it
may cause paper misfeeds depending
on the type of paper and keeping
state.
Remove the paper from drawer and
turn it over and reset.
11