Tritech ROV Sidescan Operator'S Manual Download Page 40

Page: 40 / 84

SeaKing Sidecan Sonars

0374-SOM-00013, Issue: 01

© Tritech International Ltd.

12. Introduction

The Tritech Sonar Image Tiler is designed to allow sonar images to be stitched

together into a single larger image or mosaic. This allows mapping or surveying work

to build up a complete picture of the seafloor in important areas such as harbour floors,

wreck sites or around underwater structures such as bridge and platform supports.

Note

This manual applies to software version 1.3

Hardware & Software Requirements

• A laptop, PC or SCU running Seanet Pro

a computer running the offline

DumpLog utility and a previously recorded Sidescan log file.

• Positional data either from an external GPS/USBL linked into Seanet Pro or from

a manually entered

World Position

for the sonar installation.

Summary of Contents for ROV Sidescan





















































































Search results

Summary of Contents for ROV Sidescan

Reviews:

Related manuals for ROV Sidescan

Brands by name

Popular brands

Tritech ROV Sidescan, Operator'S Manual

Search results

Summary of Contents for ROV Sidescan

Reviews:

Related manuals for ROV Sidescan

Brands by name

Popular brands