Tritech ROV Sidescan Operator'S Manual Download Page 32

Page: 32 / 84

Seanet Pro

SeaKing Sidecan Sonars

0374-SOM-00013, Issue: 01

© Tritech International Ltd.

EPC/

Alden

Select the desired printer and then tick the

Enabled

tick-box to open

the parallel port connection.

Alden

Setup

When Alden is selected this button will become active. Click this

button to setup the Alden interface.

Negative

inverts greyscale output.

Output

allows the left, right or

both channels to be chosen as the output.

Line Repeat

stretches the

printout by repeating line printouts (0 = off).

Sidescan

This is where the Sidescan channel settings are configured.

Interleaved Scan

This button becomes enabled when a DST Sidescan is

connected. The DST Sidescan has capability to fire both

channels at the same time (as opposed to in "ping-pong"

mode) and this control enables simultaneous firing.

Slope

Applies a Time Variable Gain adjustment to the received

signal returns to account for through-water attenuation of

the transmit pulse.

Summary of Contents for ROV Sidescan





















































































Search results

Summary of Contents for ROV Sidescan

Reviews:

Related manuals for ROV Sidescan

Brands by name

Popular brands

Tritech ROV Sidescan, Operator'S Manual

Search results

Summary of Contents for ROV Sidescan

Reviews:

Related manuals for ROV Sidescan

Brands by name

Popular brands