Tritech ROV Sidescan Operator'S Manual Download

Page: 22 / 84

Installing the SK150

SeaKing Sidecan Sonars

0374-SOM-00013, Issue: 01

© Tritech International Ltd.

7.3. Power

The SeaKing Towfish range of sensors are designed to work over a smoothed DC

power supply over the range specified in Chapter 4,

SeaKing Towfish SK150

Caution

Never try to make the Towfish work over a longer cable by increasing

the voltage above the maximum specified, doing so may cause permanent

damage.

If using a rectified transformer PSU the output must have a filter capacitor of at least

470μF for each head that is being powered. The use of unregulated power supplies

is not recommended.

If powering the head down a long lead or umbilical, the maximum recommended

loop resistance of the power line must not exceed 10Ω.

If the supply voltage is less than the minimum specified in Chapter 4,

SeaKing

Towfish SK150

the SK150 is unlikely to work correctly.

Ground Fault Monitoring Equipment

The power supply within all SeaKing devices includes an electrically

isolated DC to DC converter front end with a small capacitive connection

made to the sonar chassis. This should not noticeably affect any impressed

current Ground Fault Interrupter (GFI) or Residual Current Devices

(RCD).

Summary of Contents for ROV Sidescan





















































































Search results

Summary of Contents for ROV Sidescan

Reviews:

Related manuals for ROV Sidescan

Brands by name

Popular brands

Tritech ROV Sidescan, Operator'S Manual

Search results

Summary of Contents for ROV Sidescan

Reviews:

Related manuals for ROV Sidescan

Brands by name

Popular brands