Tritech ROV Sidescan Operator'S Manual Download Page 27

Page: 27 / 84

Seanet Pro

SeaKing Sidecan Sonars

0374-SOM-00013, Issue: 01

© Tritech International Ltd.

Figure 10.1. Sidescan Sonar Data in Seanet Pro

The main areas of the display are:

Display Header

- this part of the screen is used for system/software

identification.

Menu Bar

- this is where system set-up functions can be accessed.

Settings Bar

- this is where the Sidescan can be controlled and configured.

The settings bar is on top of every display window for each device that is connected

to the system. It includes a Tools Setup button, status indicator (pause/go) and

RAT dials and buttons

Status Bar

- this part of the screen is used to display system status information,

logging status/progress and job specific information.

Sensor Display Area

- this part of the screen is where the main Sidescan

data is displayed. Other pertinent data such as range scale, cursor and status

messages pertaining to the Sidescan may also be displayed within this area

10.2. Settings Bar

These controls are displayed on the Sonar Settings bar. Each button has a function

on the RAT as described:

Summary of Contents for ROV Sidescan





















































































Search results

Summary of Contents for ROV Sidescan

Reviews:

Related manuals for ROV Sidescan

Brands by name

Popular brands

Tritech ROV Sidescan, Operator'S Manual

Search results

Summary of Contents for ROV Sidescan

Reviews:

Related manuals for ROV Sidescan

Brands by name

Popular brands