Testing with HyperTerminal or Docklight
Micron Modem
0630-SOM-00001, Issue: 03
27
© Tritech International Ltd.
2. Next fill in the commands for
Test Message
,
Ranging
and
Responder
(clicking
Apply
after each command) and use the
Index
selection arrows at the top of the window to
switch to the next command window and then click
OK
to add them. The main window
should now be shown as below with the three function commands entered:
3. The COM port that the Micron Data Modem is attached to needs to be configured. Double
click on the COM port number in the top right hand corner of the main window which will
open the
Project Settings
dialog. Within this dialog select the appropriate COM port
for the modem to be used. Ensure the baud rate is set to match the modem (9600 by
default) and that the
Send/Receive
option is selected.
4. For testing the Micron Data Modem the COM port that the Master is connected to should
be selected in Docklight first and used to send the function commands and check that
