Configuration
Micron Modem
0630-SOM-00001, Issue: 03
15
© Tritech International Ltd.
Figure 5.3. Enter Micron Modem Setup
5.2. Modem Configuration Window
From the node table in Seanet Setup select
Setup
from the action column of the row which
shows the Micron Modem. This will bring up the
AM100ModemCfgSetup
dialog as shown in
Figure 5.4, “Micron Modem Configuration”.
Figure 5.4. Micron Modem Configuration
The
AM100ModemCfgSetup
dialog allows the following settings to be changed:
Unit OpMode
Select
Surface Modem
or
SubSea Modem
(
Transponder
and
Responder
are not applicable to the Micron Data Modem).
COM Rx TMO
Enabled
This option should always be selected to prevent data loss.
Test Msg (stm)
When selected, on receipt of an
stm<LF>
string the receiving
modem responds with the message:
Hello!!! This is a test
message using spread spectrum at 40bps
Ranging (rng)
When selected on receipt of an
rng<LF>
string the receiving
modem responds with a transmitted CHIRP allowing the first
