Tripp Lite SmartOnline AGPS5546, Owner'S Manual

Page: 3 / 60

1
2
3
4
A
C
E
D
F
G
B
B
3
Mount your equipment in either a 4-post or 2-post rack or rack enclosure (see next page for
2-post mounting). The user must determine the fitness of hardware and procedures before
mounting. If hardware and procedures are not suitable for your application, contact the
manufacturer of your rack or rack enclosure. The procedures described in this manual are for
common rack and rack enclosure types and may not be appropriate for all applications.
4-Post Mounting
All UPS models include hardware required to mount in a 4-post rack. Select models include an
adjustable rackmount shelf kit to provide additional support.
If your UPS model does not
include an adjustable rackmount shelf kit, skip steps 1 and 2.
Mounting Rack
Installation
1 Connect the two segments of each shelf
A
using the
included screws and nuts
B
. Leave the screws
slightly loose so that the shelves can be adjusted in
the next step.
Adjust each shelf to fit your rack, then mount them
in the lowest available space of your rack with the
screws, nuts and washers provided
C
. Note that the
support ledges should face inward. Tighten the
screws that connect the shelf segments
B
.
Attach mounting ears
D
to the front mounting holes
of your equipment
E
using the screws provided
F
.
The ears should face forward.
Using an assistant if necessary, lift your equipment
and slide it onto the mounting shelves. Attach your
equipment to the rack by using the appropriate
hardware
G
through its mounting ears and into the
rack rails.
2
3
4
201203257 93-2486.indd 3 4/3/2012 3:12:54 PM