Tripp Lite SmartOnline AGPS5546, Owner'S Manual

Page: 5 / 60

3
INPUT
BREAKER
ACC. SLOT
LOAD 1
IN
PHONE / DATA PROTECTION
OUT EPO
LOAD 2
OUTPUT
RS-232 USB
CAUTION
Risk of electric shock
See top of unit for
cautionary markings
WARNING
CONNECT 48 VDC
BATTERY SYSTEMS ONLY
CONNECTING OTHER
SYSTEMS WILL VOID
WARRANTY
1
Your model may differ.
5
Important Safety Instructions
Connection and Start-Up (continued)
Turn the UPS ON:
• Press the ON/TEST Switch and hold it for
several seconds until you hear a beep
• Release the ON/TEST Switch. The ON LINE
LED will illuminate, and your UPS will begin
providing power to its AC outlets
Note: UPS system will function properly upon initial startup,
however, maximum runtime for the unit’s battery will only be
accessible after it has been charged for 24 hours.
Your UPS will function properly without these Yoyr
Installation
(continued)
Optional Connections
3
1
UPS will function properly without these connections.
Phone/Network Line
Suppression
Your UPS has jacks which protect against surges on
a telephone line or telephone/ network data line.*
Using appropriate telephone or network cords
connect your wall jack to the UPS jack marked
“IN.” Connect your equipment to the UPS jack
marked “OUT.” Make sure the equipment you
connect to the UPS's jacks is also protected against
surges on the AC line.
* Not compatible with PoE (Power Over Ethernet) applications.
201203257 93-2486.indd 5 4/3/2012 3:12:56 PM