background image

TONN/BAT TONN UPS Option or Battery Replacement Installation Instructions TG201133 Issue 2, 12-Jun-2013 1

Installation Instructions

TONN/BAT

TONN UPS or Battery Replacement

Important: Retain these instructions

These instructions shall be used by trained service personnel only

If the equipment is used in a manner not specifi ed by these instructions, the protection provided by the equipment may be impaired.

 1

Disconnect Power

2 INSTALLATION

1 UNPACKING

CONTENTS

1 Unpacking

 .....................................................................

1

2 Installation

 .....................................................................

1

WARNING:

Power to TONN must be OFF when replacing the 

battery, or damage will occur.)

TONN/BAT TONN UPS Option or Battery Replacement Installation Instructions 

(TG201133)

Disconnect Power

O

I

Switch OFF

 2

Remove Cover

Caution:

This  unit  contains  static  sensitive  devices. 

Suitable  anti-static  precautions  should  be 

taken  throughout  this  operation  to  prevent 

damage to the unit.

BS  EN100015/1  Basic  Specifi cation: 

protection of electrostatic sensitive devices.

It is recommended that the installation should comply 

with the local electrical safety installation practices (e.g. 

HSE Memorandum of Guidance on Electricity at Work 

Regulations 1989, USA National Electric Code).

The TONN/BAT kit can be used as a replacement battery for TONN units requiring a backup battery for back up and shutdown in 

the event of power failure, or as a uninterrupterable Power Supply (UPS) for TONN (E) units. See the TONN Data Sheet (TA201127) 

for details.

Important

 

If replacing a battery follow steps (1), (2), (3), (4), (5) and (6)

 

If using a a UPS follow steps (1), (2), (4) and (5)

Reviews: