Tripp Lite NGI-M08C4-L2, Owner'S Manual

Page: 184 / 313

184
Parameter Description
PPPoE IA Port Configurations
Port Number
Selects a port number you want to configure on this screen
State
Selects Enable to activate the port or Disable to deactivate the
port
Trusted
Selects yes to sets a physical interface as trusted port
Vendor-Tag
Set the retransmitting policy of the specific interface for the
PADO/PADS
packet<keep|replace|strip>.Default:Keep
Circuit-ID String
User defined circuit ID string on specific interface for the PPPoE
IA
Remote ID String
User defined remote ID string on specific interface for the PPPoE
IA
Interface VLAN
Selects Add to increase the interface Vlan or Remove to delete
the interface Vlan
Circuit-ID String
User defined circuit ID string on specific interface vlan for the
PPPoE IA
Remote-ID String
User defined remote ID string on specific interface vlan for the
PPPoE IA
Apply
Click Apply to take effect the settings.
Refresh
Click Refresh to begin configuring this screen afresh.
6.12.3 Statistics
6.12.3.1 CLI Configuration
Node Command Description
enable show pppoe intermediate-agent
statistics
This command displays the current statistics
for the PPPoE IA.
enable show pppoe intermediate-agent
statistics by-vlan VLANLISTS
This command displays the current statistics
by specific VLANs for the PPPoE IA.
enable configure terminal This command changes the node to
configure node.
configure clear pppoe intermediate-agent
statistics
This command clears the statistics for the
PPPoE IA.
configure clear pppoe intermediate-agent
statistics by-vlan VLANLISTS
This command clears the statistics by
specific VLANs for the PPPoE IA.