Tripp Lite NGI-M08C4-L2, Owner'S Manual

Page: 138 / 313

138
FRAME - Add the frame ID into the Circuit sub-option.
The frame ID is configured with the CLI command, “dhcp-options
option82 circuit_frame VALUE”. Or GUI Circuit Frame.
SHELF - Add the shelf ID into the Circuit sub-option.
The shelf ID is configured with the CLI command, “dhcp-options
option82 circuit_shelf VALUE”. Or GUI Circuit Shelf.
SLOT - Add the slot ID into the Circuit sub-option.
The slot ID is configured with the CLI command, “dhcp-options
option82 circuit_slot VALUE”. Or GUI Circuit Slot.
Example:
HOSTNAME=L2SWITCH.
SVLAN=44.
CVLAN=32.
Circuit Form=
RD+%SPACE+Dep%SPACE+%H%SPACE+%PORT+_+%SVLAN+.+%CVLAN
The circuit sub-option result is: RD Department L2SWITCH 1_44.32
6.4.1.1 CLI Configuration
Node Command Description
enable show dhcp-options This command displays the DHCP options
configurations.
enable configure terminal This command changes the node to configure node.
configure dhcp-options option82
(disable | enable)
This command disables / enables the DHCP option
82on the Switch.
configure dhcp-options option82
circuit_id
This command configures the information of the
circuit ID sub-option.
configure dhcp-options option82
remote_id
This command configures the information of the
remote ID sub-option.
configure dhcp-options option82
circuit_frame VALUE
This command configures the frame ID for the circuit
sub-option.
configure dhcp-options option82
circuit_shelf VALUE
This command configures the shelf ID for the circuit
sub-option.
configure dhcp-options option82
circuit_slot VALUE
This command configures the slot ID for the circuit
sub-option.