Page 59
E Series Ethernet Radio – User Manual
Version 08-10
Password
The Password tab is used to give your units configuration
protection. You will notice you have two options:
•
Disabled - This allows the radios configuration can be read/
written to without a password.
•
Enabled - This prompts the user for a password upon
starting a programming session. To set the Password, write
an alpha numeric string of no longer than 16 characters long
into to the Password box, then write the same string into the
confirm password box beneath it.
Messages
The message window provides a log of error messages occurring
during use of the programmer utility. Several error messages may
occur as a result of an inappropriate selection.
Status Bar
The status bar is located at the bottom of the main window and
provides information regarding communication actions occurring
with the radio data modem.
Additional fields located on the status bar include:
•
Unit ID
refers to the identification label used by the
diagnostics utility. This is currently the same as the unit’s
serial number.
•
Mode refers to the type of session established. It can be a
File, Local indicating a local port connection to the unit or
Remote indicating communications is via a radio channel.
